Transform Your Room With Faux Wood Beams

You'd be hard-pressed to inform the distinction between actual wooden ceiling beams and high-quality polyurethane look-alikes. If you’d like the look of actual wooden beams with out the exhausting labor of putting in and ending them, fake wooden beams are the ticket. You will get them in a lot of types and prefinished colours to fit your style, from tough and rustic to easy and comely.

Fake beams are a fraction of the load of wooden, so one particular person can simply raise the most important beam, and two folks can safely maneuver them throughout set up. You narrow them with strange woodworking saws, they usually connect to the ceiling with adhesive and some screws.

Right here's how simple it’s to put in a ceiling beam.

What You Want

  • Beams and matching wooden filler, obtainable on-line for cargo to your door (Google "fake wooden beams")
  • Quick items of 2×4 to make use of as mounting blocks
  • Three-inch screws or anchors for attaching 2×4 blocks to ceiling
  • 2-inch screws for attaching beam to blocks
  • Building adhesive similar to Liquid Nails Poly or PL Premium Poly


The ceiling beam has a U cross part, open alongside the highest the place it rests in opposition to the ceiling. To put in the beam, you first lower quick wooden blocks that match contained in the U and screw these to the ceiling. You then apply adhesive to the highest edges of the beam, slip it over the blocks and screw the beam to them.

Step By Step

After you've deliberate the place the wooden beams will go, simply observe these easy steps to put in every beam:

  1. Measure the within width of the ceiling beam and lower 2×4 blocks to suit. You want about one block for every four ft of beam.
  2. Mark the place the beam will go on the ceiling utilizing a pair of chalk strains or strips of painter's tape.
  3. Connect the 2×4 blocks with screws or anchors each Three-6 ft alongside the strains you've marked. Then you possibly can mud off the chalk line or take away the painter's tape.
  4. Mark the beam for slicing. If the wall and ceiling don’t type a proper angle, switch the angle utilizing a sliding T bevel. If the beam extends from wall to wall, mark it about 1/eight inch longer for a cosy match.
  5. Reduce the fake wooden beam to size. Use an influence miter noticed, handbook miter field or any sharp, fine-tooth woodcutting noticed for a easy lower. Dry-fit the lower beam to ensure the size is true.
  6. Apply building adhesive alongside the open high edges of the beam.
  7. With a helper, slip the beam over the blocks, maintain it snugly in opposition to the ceiling, and screw it to every block on all sides. Countersink the screws slowly.
  8. Fill the screw holes with matching wooden filler.
  9. Climb down the ladder, sit again in a snug chair and admire the brand new dimension you've simply added to your room.

Suggestions for Nice Outcomes

  • If doable, place every 2×4 block on a ceiling joist. Then you need to use plain screws to connect them securely and never must trouble with plastic or metallic anchors.
  • Reduce the ceiling beam slowly lengthy so the ends match snugly into place in opposition to the partitions.
  • Apply the bead of adhesive towards the within of the wooden beam so it doesn’t squeeze outdoors the beam. If some adhesive does squeeze out, fastidiously wipe it away. Or, to keep away from smearing, let the adhesive harden first after which lower it away with a razor or utility knife.

Extra Dimensions

You are able to do far more than connect fake wooden beams to the floor of the ceiling. You may enclose the open aspect and ends of the beam for a totally strong look from all angles. You may droop beams from level to level to simulate ties or trusses. You should utilize them vertically to simulate help posts. And you need to use fake wooden beams and equipment outdoor as properly, for all the things from ornamental headers and corbels to freestanding pergolas.

Source by Jon McLean